Peanut Roaster Machine Introduction
Our peanut roaster machine is a new type of high-efficiency energy-saving peanut processing machine. The roasted peanut have a pure taste. It has the advantages of energy saving, safety, convenient sanitation, fast temperature rise, stable performance, low energy consumption, low operating cost, long service life, simple operation and maintenance, etc.
Peanut roasting machine is heated by gas or electric. It adopts the principle of rotary roasting chamber, heat conduction, heat convection and heat radiation. During the roasting process, the peanut is forwarded by a pushing screw which makes it evenly roasted, and effectively guarantees the roasted peanut quality.
Peanut Roaster Machine Features
1. Our peanut roaster maximizes the effective volume, and the microcomputer temperature controller ensures accurate and reliable temperature control.
2. Storage, heating, testing and drying are carried out in the absence of oxygen or filled with inert gas, so it will not oxidize.
3. The tightness of the peanut oven box can be adjusted. The integrally formed silicone rubber door seal ring ensures high vacuum in the chamber.
4. The peanut roaster machine is made of stainless steel to ensure that the product is secure and durable.
5. Tempered, bullet-proof double-glazed glass door to observe peanut in the working room at a glance.
6. The shortest heating time is shorter than the heating time of traditional vacuum peanut oven.
The appearance of the peanut roasting machine has greatly enriched our lives. It is also a very important machine in peanut butter production line, It has high temperature resistance, erosion resistance, low fuel consumption, high thermal efficiency, convenient movement, easy maintenance, and wide range of uses. Its structure is relatively simple and easy to clean. The peanut roaster machine has advantages such as convenient use, high efficiency and energy saving, and durability. The baked products are of good quality, hygienic, positive taste, and can reach export standards.
How to Extend the Service Life of Peanut Roaster
1. Before start the peanut roaster, operator should check whether each fastener is tightened, whether the rotating part is flexible, and whether there is lubricant in each bearing. The sheller should be placed on a stable floor.
2. After the motor is started, the rotation of the rotor should be consistent with the direction indicated on the implement. First idling for a few minutes, observe if there is any abnormal noise, and then feed the peanuts evenly after normal operation.
3. Choose the appropriate screen according to the particle size of the peanut.
4. Peanut should be fed evenly and in an appropriate amount. It should not contain iron debris, stones and other debris to prevent breaking the peanut and causing mechanical failure.
5. When the peanut shell increases in the peanut, you can move the motor downward to tighten the fan belt and increase the amount of air blowing.
6. During operation, do not stand on the side of the belt drive to avoid injury.
7. Ensure that there is sufficient lubricating oil in the transmission parts and bearings, and clean and replace them regularly.
8. When using the machine for a period of time, it is necessary to remove the dust, dirt, and residual grains inside the machine, and remove the belt for storage. Clean each part of the bearing with diesel oil and dry it with butter. The machine should be covered in a dry warehouse to avoid direct sunlight and rain.
